Rotogravure Printing Machines
- Main Printing Station : Consists of -
1 no. main motor – AC -
Eight Nos. Printing Stations (Reversible Station Optional).
-
Side frame construction of precisely machined
-
Mild Steel Plates.
-
Cylinder shaft supported by bearings mounted on bearing housings.
-
Can accept hollow as well as Shaft Type cylinders.
- Common Drive for all the printing station connected through Individual Gear Box.
| Enquir Now |
| TECHNICAL SPECIFICATION | |
| Type of Machine | Rotogravure Printing Machine |
| Number of Printing Stations | Tow to Ten Colours |
| Web Width | 500 mm to 1500 mm |
| Print Width | 400 mm to 1400 mm |
| Printing Repeat | 320 mm – 750 mm |
| Printing Possibilities | 1 to 10 Colours (Variable as per number of colour of machine.) |
| Printing Speed | 140 mts./min. Maximum Mechanical Speed* |
| Power Requirement | Variable as per the Machine Size |
| Supply Voltage | 415 V, # Phase, 50 cycles/sec, 4 wire |
| Floor
Space-Length Width Height |
Variable as per the Machine Size & Number of Colours. |
| Material to be Printed | FOIL, PAPER, FILM & LAMINATES |
| Due to regular R & D Specification may have variations without prior notice | |
GEARBOX
Helical Gear Box Assembly Duly ground & hardened with oil bath Lubrication.
INK SYSTEM:
Immersion type inking system consists of 1 No. Stainless steel Ink Tray
PNEUMATICALLY OPERATED
Doctor Blades Assembly
Impression Roll System
Drying hood – a unique & important feature of the machine, which is a must for easy web guiding and cleaning of the idler rollers.
Nip Roll Assembly – for In Feed & Out feed Station.
REGISTRATION SYSTEM
Motorized longitude (Vertical) colour register system.
Manual side lay (lateral) register by means of a mounting blocks on the operator side of +-10 mm correction
HEATING SYSTEM
The drying system is designed for following: -
a. Electric Heating System or
b. Diesel fired Heating System or
c. Thermic Fluid Heated Air Blow System
EXHAUST SYSTEM UNWIND STATION CONSIST OF
Web guiding System
Automatic Tension Control System powder brake with load cells
Auto stop mechanism to stop the machine for the break in web,
Pneumatic shaft
IN FEED STATION CONSIST OF
1 No. AC Motor Controlled by Programmable Digital AC Drive Load cell back up duly synchronized and auto tension controlled
OUT FEED STATION
1 No. AC Motor Controlled by Programmable Digital AC Drive Load cell back up duly synchronized and auto tension controlled
REWIND STATION CONSIST OF
1 No. AC Motor Controlled by Programmable Digital AC Drive Load cell back up duly synchronized and auto tension controlled Pneumatic shaft
OPTIONALS
Autimetic Registration Control System.
Web Viewing System
Turret Unwind & Rewind System
Motorised INK PUMPS with Immflammable Motors
Electronic Link Shaft System (SERVO DRIVE SYSTEM)